We are specialist producer of 3D panel production line. We have two types of this 3D panel machine: XL-ZH-1200A, XL-ZH-1200B types, so we can fit you according to your demands.
The following is the specification of the normal 3D panel type:
Truss wire: 2mm -2.8mm Galvanized.
Mesh Wire Diameter: 2.0mm -2.8mm
Mesh Hole: 50mm*52mm
Panel length: 3000mm or 6000mm
Panel width: 1220mm
EPS Insulation Core: 50-100 mm, Self Extinguishing
Mesh wire material: Low carbon steel wire.
Spacing between cover Mesh and EPS Core: 10 mm
Overall Thickness of EPS Panel: Max. 70-120 mm
Diagonal truss: 100 per Sq. Mtr.
Input Supply: AV380V 50HZ
Air Source Equipment: 3m3/min 0.6MPA
EPS: Polystyrene Foam Board
Dimension: 13500X1800X1700mm
Machine Weight: 4000Kg |
|
|
|
|
